Sniper Hog Lights Coyote Cannon Gun Hunters Package


In stock

SKU: CCGHP1-4 Category:


Coyote Cannon has a Adjustable focus so you can go from a flood beam to spot beam allowing you to put just the right amount of light on your target. Only takes about 1/8 turn of the head to go from full flood to full spot beam. You can also lock down the focus. This means if you want to lock down the focus of the beam at full flood, full spot beam or anywhere in between you can.
The Coyote Cannon only comes with a dimmer tail cap giving complete control over the lights brightness. We do have a tail cap with wired dimmer slide switch that is available in the options.
The dimmer tail cap has a dial on the back end that you turn to turn up or down the brightness of the light.
Interchangeable LED modules so you can easily change the color if you order the optional LED modules.
Runs on 1 21700 Rechargeable battery. You can add 2 extra 21700 5000ma batteries in the options above. The charger is one of the fastest charging chargers on the market. It will charge 2 batteries at the same time at 2000ma each or 1 battery at 3000ma. Will charge almost any 3.7V rechargeable battery including 18650, 21700, 20700, 26650 batteries and more. Charger includes USB plug, 110-240V AC plug and 12V DC plug. This means you can charge the batteries from your computer, Wall outlet or your Vehicle.

The difference between the 850nm IR and 940nm IR is the distance they shine and the red glow to the LED is much less with the 940nm IR then the 850nm IR and some believe that 940nm IR is less likely to spook animals then the 850nm IR because it has less red glow to the LED.
Can be easily mounted to a 35mm, 30mm or 1″ scope tube or Weaver/Picatinny rail with our included Predator Pro mount. With this mount, you can adjust the distance the light sits from your gun/scope and it also has windage and elevation adjustments so you can get the light lined up perfect with your scope. This is a rock solid mount with a Quick release knob for easy mounting and dismounting from your gun. This is a two piece mount, The light mounts in the top piece and this is the piece that has the height, windage and elevation adjustments. The top piece mounts to rails. The bottom piece is what mounts to scope tubes and has a rail on it so you can mount the top piece to it.
Optional Light handle for Scanning.

Technical Specs

Made out of aircraft grade aluminum and hard anodized to resist scratching.
Weighs about 28 ounces with battery, about 32 ounces with battery and mount.
Runs on 1 21700 battery.
About 9 inches long in flood beam and about 10 inches long in spot beam.
Head is about 2.75 inches across with a 30mm body/tube.
Lumens, Red = 400, Green = 1150, White = 1000.
Run time = 2.5 hours at full power. Turn the power down just a little and you will get much longer run times. For Example: With the Red Coyote Cannon, we set the brightness to be exactly the same in spot beam as one of our top competitors lights in spot beam and the Coyote Cannon ran for 7 hours and stayed brighter then that competitors light the entire life of their battery that ran for 4 hours and 55 minutes. The Coyote Cannon was brighter after running 7 hours then the competitors light was after running 2 hours. On top of that, after the Coyote Cannon had been running for 7 hours in the example above, we turned it up and it still shined over 900 yards. What all this means is there is no point in buying one of our competitors lights just because they claim longer run times because if you turn the Coyote Cannon down to where it’s a little brighter then any of our competitors lights, you will get a longer run time out of our Coyote Cannon then their light and this includes one of our competitors lights that runs on 3 batteries and the Coyote Cannon only uses 1 battery.
The Coyote Cannon is simply the furthest shinning Led light on the market and there isn’t another light that even comes close. Actually the closest light is our 66LRX light.
Will clear all scopes objectives up to 60mm with our Predator Pro mount.

1 – Coyote Cannon Light with dimmer tail cap so you have complete control over the lights brightness.
1 – LED module installed in the light in your choice of color(Red, Green, White, IR). The LED module color determines the color of light your light will emit. Choose your LED module(s) color above under “Choose options”. LED modules can be changed in the light in just seconds as it simply screws in and out.
2 – 21700 5000mA rechargeable batteries
1 – Fast Battery charger with USB, AC and DC plugs
1 – Predator Pro Mount that is Height, Windage and Elevation adjustable.
1 – Custom hard carrying case with custom cut EVA foam.
1 – Lens cover to protect the lens when not in use.

Please click here for the differences between the normal IR and Turbo IR.